header valves
Valves & Actuation

Product Sitemap

  • Corrosion Resistant Industrial Plastic Valves - Thermoplastic Valve Manufacturer
  • Industrial Manual Thermoplastic Valves - PVC, CPVC Plastic Flow Control Valves
  • PVC, CPVC Plastic Ball Valves - Multiport, Full Port True Union Ball Valves
  • PVC, CPVC, Plastic Wafer & Lug Butterfly Valves - Lever, Gear Operators
  • PCV,CPVC Plastic Manual Diaphragm Valve - Diaphragm Valve Manufacturer
  • PVC, CPVC Plastic Check Valves - Swing Check, Wafer Check, Ball Check Valves
  • PVC Plastic Constant Flow Control Valve - Corrosion Resistant Flow Regulators
  • PVC Plastic Manual Flanged Gate Valve - ON Off Upstream & Down Stream Valves
  • PVC, CPVC Plastic Y Strainer - Flanged Wye Strainers
  • PCV,CPVC Plastic Manual Flanged Globe Valve - Globe Valve Manufacturer
  • Electric & Pneumatic Actuated Valve - Valve Actuators - Actuator Manufacturer
  • Electric & Pneumatic Actuated Ball Valve - Motorized & Air Operated Ball Valves
  • Electric & Pneumatic Actuated Butterfly Valve - Motorized & Air Operated Butterfly Valves
  • Pneumatic Actuated Diaphragm Valve - Air Actuated Diaphragm Control Valve
  • Electric Actuated Gate Valve - Actuated Gate Valve Manufacturer
  • Plastic Automatic Globe Control Valves - Valves for Flow Control
  • Plastic Valve Actuator Packages - Quick Turnaround Fast Packs Valves/Actuators
  • Pneumatic & Electric Actuator Manufacturer - Actuator Valve Controller
  • Spring Return Double & Single Acting Pneumatic Actuator - Control Valve Actuator
  • Quarter turn Electric Actuator - Smart Actuator - Motorized Actuator
  • Chemical Resistant Industrial AV Gaskets - PVDF, PTFE, Rubber Pipe Gaskets
  • Plastic Piping & Fusion Welding Equipment - Industrial, Commercial & High Purity
  • PVDF, PP & PFA Piping Systems - High Purity Pipe, Valves, Fittings
  • Advanced PE, PP, Halar, PVDF Piping Systems - Industrial Pipe, Valves, Fittings
  • Double Wall Plastic Piping Systems - Environmental Pipe, Valves, Fittings
  • Asahitec™ PP-RCT and Compressed Air Piping Systems - HVAC Pipe, Valves, Fittings
  • Butt, Socket, Cleanroom, Electrofusion Welding Tools - Purchase or Rent
  • Plastic Compression, Flare, Miniature & Specialty Valves & Fittings - 1/8" - 1"
  • Purad® Ultra High Purity Pipe, Valves & Fittings - For HP Water Systems
  • PolyPure® Natural PP Pipe, Valves & Fittings - For Labs, Deionized & RO Water
  • PP-Pure® Pigmented PP Pipe, Valves & Fittings - For Semiconductor & photovoltaic
  • Purflon® PFA Pipe & Fittings - For High Purity Chemical Transfer, Medial & Labs
  • Plastic Zero Deadleg Diaphragm Valves & Sampling Valves - For High Purity
  • PVDF, PP & Halar® Frank Pressure Regulators, Pressure Relief Valves, Flow Meters
  • High Purity PVDF,PP Gauge Guards, Faucets Accessories
  • Proline® Pigmented PP Pipe, Valves & Fittings - For Processed Waste Drains
  • Super Proline® Pigmented Chemical Grade PVDF Pipe, Valves & Fittings
  • Ultra Proline® ECTFE Pipe, Valves & Fittings - For Acids & Aggressive Chemicals
  • Advanced PE Chem Proline® Pipe, Valves & Fittings - For Water Treatment
  • Plastic Air-Pro® HDPE Pipe, Valves & Fittings - For Compressed Air
  • Poly-Flo® PP-R & Advanced PE Double Wall Piping - For Industrial Applications
  • Duo-Pro® Engineered Plastic Double Wall Piping - For Industrial Applications
  • Chem Prolok® Advanced PE Double Wall Piping - For Sodium Hypochlorite
  • Fluid-Lok® HDPE Double Wall Piping - For Industrial Applications
  • Pro-Lock® PVC and CPVC Double Wall Piping - For Industrial Applications
  • Manual, Electronic, Continuous Cable Leak Detection - Liquid Watch, PAL-AT
  • Closure Coupling for Duo-Pro® Double Wall Piping Systems
  • Asahitec™ PP-RCT Plumbing & HVAC Piping, Valves, Fittings
  • High Purity ePTFE Gaskets - Prevents Leachout Contamination
  • SP Series Automated IR Welding Tools for High Purity Cleanrooms - Purchase on Rent
  • Butt Welding Tools - Rack, In Place or Trench Fusion of Plastic Piping Systems
  • Socket Welding Tools - Field or Shop Fusion of Plastic Piping Systems
  • Electrofusion Welding Tools - Final Tie-in or Difficult Locations
  • Manual Hand Held Hot Air Bead Welding Tool. For PVC,PP,PVDF & ECTFE materials
  • Prep Tools, Rotational Scrapers, Bevellers for Butt & Socket Welding
  • PP,PVDF,PFA EM-Technik™ Fittings for Labs, Medical and Semiconductor Applications
  • PP,PVDF,PFA EM-Technik™ Flare Fittings for Connecting to Plastic Tubes
  • PP,PVDF,PFA EM-Technik™ Miniature Fittings for Labs & Medical
  • PP,PVDF,PFA EM-Technik™ Luer Lock & Glass Tube Fittings for Labs & Medical

    •  To download a PDF of the 2020 ASPE Digital Experience survey terms and conditions shown below, please click here.

    Survey Terms

    Air Pro Logo 2020 1 NEW Air Pro no background 1 Air Pro 1

    Asahi/America is the leading manufacturer and distributor of thermoplastic fluid flow solutions including valves, actuators and piping systems to industrial, chemical, wastewater treatment and high purity markets. Asahi/America's Air-Pro® is the only HDPE piping system approved for use and warranted by the manufacturer for compressed air applications. Air-Pro® meets CAL-OSHA requirements for compressed air.

    Click here to learn more about Air-Pro® Compressed Air Piping System

    Contact us at 800-343-3618 or asahi@asahi-america.com. Asahi/America does not sell direct. Our complete line of thermoplastic fluid flow solutions may be purchased through an authorized distribution network in the United States, Mexico, Central America, South America, The Caribbean, Canada, Great Britian and Australia.

    Please complete the form below so that we are able to better assist you.

     

    Compressed Air
    1. First Name:(*)
      Please Enter Your First Name
    2. Last Name:(*)
      Please Enter Your Last Name
    3. Company:(*)
      Please Enter Your Affiliated Company
    4. Job Title:
      Invalid Input
    5. Email:(*)
      Please Enter a Valid Email
    6. Phone:(*)
      Invalid Input
    7. Company URL:
      Invalid Input
    8. City:(*)
      Please Enter a City
    9. State:(*)
      Please Enter a State
    10. Zip/Postal Code:(*)
      Please Enter a Valid Zip Code
    11. Country:(*)
      Please Select a Country
    12. Comments:
      Invalid Input
    13. Would you like us to contact you by phone?
      Invalid Input
    14. Would you like us to contact you by email?
      Invalid Input

    17. Invalid Input

    Project of the Year Email 2

    ENTER AS MANY PROJECTS AS YOU'D LIKE!

    • Entering the contest is easy and simple! Fill out the short form below and include a photo.
    • Enter your photo in one of three categories:
      • Valve & Actuation
      • Piping System
      • Most Unique Installation
    • Win a trophy recognizing your achievement and a $50 AMEX gift card.

    Contest is open to anyone in all countries where Asahi/America products are sold or installed.

    Project must be installed any time in 2020. Entries must be submitted before January 31, 2021.

    Click here for complete contest terms and conditions

    Please send any questions or issues regarding this contest to asahi@asahi-america.com.

    Project of the Year Application 2020
    1. First and last name:(*)
      Please enter your first name.
    2. Company:(*)
      Please enter your company name.
    3. Job title:(*)
      Invalid Input
    4. Phone number:(*)
      Please enter your phone number.
    5. Email:(*)
      Please enter your email address like the following format: xxx@test.com
    6. Category:(*)
      Invalid Input
      Please fill out separate applications if applying for more than one category.
    7. Asahi/America product used:(*)
      Invalid Input
    8. Brief description of the photo/project:(*)
      Invalid Input
    9. Image:(*)
      Please submit at least one installation photo.
      For additional photos, send to asahi@asahi-america.com and reference Project of the Year and the project title.
    10. Terms and conditions(*)
      Please check this box.
      Checking this box confirms you agree to the terms and conditions to enter this contest.

    Welding Training Certification Card Form

    Weld Inspector Training Record Sheet - download spreadsheet and email completed sheet to This email address is being protected from spambots. You need JavaScript enabled to view it.

    Please complete the form below to request a training certification card:

    Thank you for your submision to our 2020 Project of the Year contest. Contest results will be available no later than February 28, 2021.

    Should you have any questions, please contact our marketing team at 781-388-4531 or via email This email address is being protected from spambots. You need JavaScript enabled to view it. .

    Asahi/America 2020 Customer Satisfaction Survey

    The survey runs until December 31, 2020.

    Take our quick ten-question online survey and let us know how we are performing.

    Win one of four $50 AMEX gift cards given away each month in Oct., Nov. and Dec.
    survey button

    Website magic 1920 x 1080

    Asahi/America will be introducing a truly magical new product in 2021 and we want you to be one of the first people to find out.

    Be in the know!

    • Know what it is.
    • Know when it will be available.
    • Know before anyone else!

    Please complete the form below and we'll keep you in the know.

    Magic
    1. First and Last Name(*)
      Invalid Input
    2. Company(*)
      Invalid Input
    3. Email Address(*)
      Invalid Input

    *Filling out this form will only be used as part of our magic product launch campaign, not for any other Asahi/America email marketing campaign.

    To download a PDF of the 2020 AFC20 Virtual Show Survey terms and conditions shown below, please click here.

    Survey Terms and Conditions

    Fill out the request form below to recieve a downloadable copy of Asahi/America's struvite piping solution case study.

     
    Struvite case study request form
    1. First and Last Name:(*)
      Invalid Input
    2. Company Name:(*)
      Invalid Input
    3. Email:(*)
      name@example.com
    4. Phone Number:(*)
      Invalid Input
                                                                                                                                            		 Struvite case study

    To download a PDF of the 2020 WEFTEC Connect Survey terms and conditions shown below, please click here.

    WEFTEC Connect 2020 Terms and Conditions 1

    We have recieved your request.

    Thank you for your request. We will be sending your mouse pad in the mail within 3-5 business days. For any questions, please email us at This email address is being protected from spambots. You need JavaScript enabled to view it.  or call 800-343-3618.

    Mouse pad Request Form

    If you are interested in receiving a free My Asahi mouse pad, please fill out the form below with either your branch or home address. Your mouse pad(s) will be sent in the mail within 3-5 business days.

    Did you know you can track orders, check inventory, create quotes, check product pricing, print invoices, and more with the new My Asahi web portal? Sign up today for this convenient tool, available to all authorized Asahi/America distributors 24/7!

    My Asahi Mousepad no background

    Giveaway Request Form
    1. First and Last Name:(*)
      Invalid Input
    2. Company:(*)
      Invalid Input
    3. Address Line 1:(*)
      Invalid Input
    4. Address Line 2:
      Invalid Input
    5. City:(*)
      Invalid Input
    6. State:(*)
      Invalid Input
    7. Zip Code:(*)
      Invalid Input
    8. Email:(*)
      emailaddress@xyz.com
    9. Phone Number:(*)
      Invalid Input
    10. If you would like multiple mouse pads for you or your branch, please indicate how many we should send and the branch address (if different from above):
      Invalid Input

    Lunch and Learn with Asahi/America

    Thank you for your interest in Asahi/America products. When you sign up for a lunch and learn presented by Asahi/America, lunch is on us!* Our team of experts will train you and your staff on our products at a location of your choice, and provide lunch while you learn.

    Fill out the form below to request a lunch and learn for you and your team, and a local Asahi/America team member will reach out to you shortly. For immediate assistance, please contact our customer service department at 800-343-3618 or email at asahi@asahi-america.com.

    Because of current COVID-19 restrictions, Asahi/America is happy to accommodate your firm's needs by doing a webinar.

    *Please note, this opportunity is only available for companies located within the U.S. 

    Asahitec Lunch and Learn Setup

    General Lunch and Learn Request Form
    1. First and last name*
      Please let us know your name.
    2. Job title*
      Job title
    3. Company*
      Please enter the name of your company.
    4. Your email*
      Please let us know your email address.
    5. Phone number*
      Please enter phone number using the format 123-456-7890
    6. Address line 1*
      Please enter an address.
    7. Address line 2
      Invalid Input
    8. City*
      Invalid Input
    9. State*
      Invalid Input
    10. Zip code*
      Invalid Input
    11. Which Asahi/America products are you interested in? (check all that apply)*






      Invalid Input
    12. What is your time frame for a lunch and learn?*



      Invalid Input
    13. How many people would be attending the lunch and learn? (approximately)*
      Invalid Input
    14. Would you prefer to do a virtual/digital presentation?*
      Invalid Input
    15. Would you be interested in receiving Continuing Education Credits (CEUs) or Professional Development Hours (PDHs)?*
      Please select an option.
    16. Notes:
      Invalid Input

    Lunch and Learn Request - Thank You

    Thank you for your interest in Asahi/America products. An Asahi/America team member will reach out shortly to setup a lunch and learn.

    For any immediate questions, please contact our customer service team at 800-343-3618 or email us at This email address is being protected from spambots. You need JavaScript enabled to view it. .

    Virtual Catalog Library

    Please click on the appropriate cover or link below it to open the virtual product catalog you desire. Click here to order a printed copy of any of these catalogs.

    PUB10005 General Catalog Cover 2018 Asahi General Catalog Spanish PUB10007 General Catalog Cover PORT 2016 ASPE catalog 2020 PUB20005 2017 Valve Catalog Cover PUB20020 Actuation Only 2018 Cover

    General Catalog - English

    General Catalog - Spanish

    General Catalog - Spanish

    ASPE Cource Catalog

    Valve & Actuation Catalog

    Actuation Catalog
    PUB30005 Engineering Desing Guide Cover 2014 PUB35005 Double Wall Catalog Cover PUB35019 Poly flo Cover 2015 PUB35030 Air Pro Cover 2014 PUB35036 Air Pro SP Cover 2014 Catalog Asahi Proline 2017

    Engineering Design Guide

    Double Wall Piping Catalog

    Poly-Flo Catalog

    Air-Pro Catalog - English

    Air-Pro Catalog - Spanish

    Industrial Piping Catalog
    PUB35050 Advanced PE Catalog Cover 2015 Page 01 PUB35060 Chem Proline Cover Spanish 2013 PUB40000 High Purity Catalog Cover 2014 PUB35080 ProVent Catalog Cover 2016 PUB40070 Frank Catalog Cover 2013 Page 1 Proline Catalog 2017 Spanish

    Chem Proline Catalog

    Chem Proline - Spanish

    High Purity Catalog

    Pro-Vent Catalog

    Frank Catalog

    Industrial Piping - Spanish

    PUB40080 Welding Catalog 2018 Cover PUB50060 ASAHITEC Catalog Cover 2018 PUB60150 Wet Process Catalog Cover. 2013 Asahi America Swimming Pool Industry Line Card 2017 Cover  Swimming Pool Industry Line Card 2017 SPANISH  PUB40060 Validation Guide Cover 2002

    Welding Equipment Catalog

    Asahitec Catalog

    Wet Process Catalog

    Swimming Pool Line Card

    Swimming Pool - Spanish

    Validation Guide
    Metal vs Plastics 2018 Cover Fabrication Brochure Cover 2018  Asahitec EDG Cover 2019  Spanish Valve Catalog Cover 2019     

    Replacement of Metal Valves

    PPI/Fabrication Brochure

    Asahitec Engineering Design Guide

    Valve & Actuation - Spanish

    		    

    Wafer Check Valves

    July is Wafer Check Valve Month at Asahi/America

    Thank you for purchasing a wafer check valve

    Please complete the form below so we can send you your FREE Asahi/America t-shirt and enter you into the raffle for a $100 AMEX gift card.

    Registration Form
    Your Name (*)
    Please let us know your name.
    Your Email (*)
    Please let us know your email address.
    Company (*)
    Please write a subject for your message.
    St Address (*)
    Invalid Input
    City (*)
    Invalid Input
    State (*)
    Invalid Input
    Zip Code (*)
    Invalid Input
    PO Number (*)
    Invalid Input
    T-shirt size (*)
    Invalid Input

    T-Shirt Request Thank You

    Thank you for requesting your AALSO/RAW 2020 aquatic-themed t-shirt. We will mail your shirt(s) within three business days. For any questions, email us at @asahi-america.com

    Return to t-shirt request form

    Salesmen RFQ Service Center

    My Asahin Logo

    Video Tutorials

    My Asahi web portal is a tool for authorized Asahi/America distributors to gain instant access to order status, create quotes, view real-time inventory levels, check order shipping/tracking information and more.

    These how-to video tutorials below are meant to guide users on the My Asahi web portal FAQs.

    For questions or issues regarding the portal, please contact us at  This email address is being protected from spambots. You need JavaScript enabled to view it.  or call our customer service number at 800-343-3618.

    How to Create an Account

    How to Login

     

     

     

     

    Create an Order with Quick Shop

    Create an Order with Excel

     

     

     

     

    My Orders/Check Tracking Information

    My Invoices

     

     

     

     

    Quick Quote

    My Quote

     

     

     

     

    Product Search

     
     

     

     

     

     

    Recorded Webinar Tutorials

    May 15, 2020 Webinar

     
     

    Request for Quote - Valve

    Valve RFQ
    1. Project name:(*)
      Invalid Input
    2. Contact name:(*)
      Invalid Input
    3. Contact email:(*)
      Invalid Input
    4. Contact phone:(*)
      Invalid Input
    5.  
    1. 1. Basic System Information
    2. Valve type:
      Invalid Input
    3. Media and known chemicals:
      Invalid Input
    4. System process:
      Invalid Input
    5. Valve function:
      Invalid Input
    6. Max temperature:
      Invalid Input
    7. Operating pressure:
      Invalid Input
    8. Max system pressure:
      Invalid Input
    9. Flowrate(s):
      Invalid Input
    10. Line size(s):
      Invalid Input
    11. Presence of solids?
      Invalid Input

    12. UV exposure?
      Invalid Input

    13. Buried?
      Invalid Input

    14. Vacuum system?
      Invalid Input

    15. NSF-61 required?
      Invalid Input
    16.  
    1. 2. Valve Construction
      If you know what valve material you would like to use, please select it below. If you would like a recommendation from the Asahi/America Engineering Department, please fill out the chemical resistance information in Section 4.

    2. Body material:
      Invalid Input
    3. Other:
      Invalid Input

    4. Disc material (butterfly valves only):
      Invalid Input

    5. Sealing material:
      Invalid Input
    6. Other:
      Invalid Input

    7. Connection type:
      Invalid Input

    8. Connection standard:
      Invalid Input
    9. Other:
      Invalid Input
    10.  
    1. 3. Valve Operation
    2. Please select either manual or actuated.
      Invalid Input

    3. For manual butterfly valves, please select:
      Invalid Input

    4. If electrically actuated, please select voltage
      Invalid Input

    5. If electrically actuated, please select code requirements (any which apply):
      Invalid Input
    6. Other:
      Invalid Input

    7. If pneumatically actuated, please select operation type:
      Invalid Input
    8.  
    1. 4. Chemical Resistance Information
      Please fill out if a material recommendation is required from the Asahi/America Engineering Department. For propietary chemicals (or "trade-name" chemicals) a SDS form should be attached as well.
    2. Chemical 1 and Concentration:
      Invalid Input
    3. Chemical 2 and Concentration:
      Invalid Input
    4. Chemical 3 and Concentration:
      Invalid Input
    5. Chemical 4 and Concentration:
      Invalid Input
    6. Chemical 5 and Concentration:
      Invalid Input
    7. Operating temperature:
      Invalid Input
    8. Operating pressure:
      Invalid Input
    9. Max temperature:
      Invalid Input
    10. Max pressure:
      Invalid Input
    11. For proprietary chemicals (or "trade-name" chemicals), a SDS form should be attached as well.
      Invalid Input
    12.  
    1. 5. Manual options
    2. Please indicate below any additional options which might be required. Not all options may be compatible with each other. Other options may exist in the pricebook.
      Invalid Input
    3. Tag
      Invalid Input
    4. Assisted shut (check valves)
      Invalid Input
    5. Multiport ball options
      Invalid Input
    6. Other:
      Invalid Input
    7.  
    1. 6. Electric and Pneumatic Options

    2. Electric options (if valve operation is electric):
      Please indicate below any additional options which might be required. Not all options may be compatible with each other. Other options may exist in pricebook.
      Invalid Input
    3. Other:
      Invalid Input

    4. Pneumatic options (if valve operation is pneumatic):
      Please indicate below any additional options which might be required. Not all options may be compatible with each other. Other options may exist in pricebook.
      Invalid Input
    5. Other:
      Invalid Input

    6. Documentation:
      Invalid Input
    7. Other:
      Invalid Input

    Request for Quote - Pro-Vent Duct Systems

    Provent RFQ
    1. Project name:*
      Invalid Input
    2. Contact name:*
      Invalid Input
    3. Contact email:*
      Invalid Input
    4. Contact phone:*
      Invalid Input
    5.  
    1. 1. Basic System Information
    2. Media and known chemicals:
      Invalid Input
    3. System process:
      Invalid Input
    4. Ambient temperature range:
      Invalid Input
    5. Install temperature:
      Invalid Input
    6. Operating static pressure:
      Invalid Input
    7. Max system static pressure:
      Invalid Input
    8. Air flow (SCFM):
      Invalid Input
    9. Size(s) requested:
      Invalid Input
    10. Possibility of static?
      Invalid Input
    11. UV expsoure?
      Invalid Input
    12. Buried?
      Invalid Input
    13. UL or other code requirement?
      Invalid Input
    14.  
    1. 2. Piping Material Selection.
      If you know what piping material you would like to use, please select it below. If you would like a recommendation from the Asahi/America Engineering Department, please fill out the chemical resistance information in Section 3.

    2. Vent material (leave blank if unknown):
      Invalid Input
    3. Other:
      Invalid Input
    4.  
    1. 3. Chemical Resistance Information.
      Please fill out if a material recommendation is required from the Asahi/America Engineering Department. For proprietary chemicals (or "trade-name" chemicals) a SDS form should be attached as well.
    2. Chemical 1 and Concentration:
      Invalid Input
    3. Chemical 2 and Concentration:
      Invalid Input
    4. Chemical 3 and Concentration:
      Invalid Input
    5. Chemical 4 and Concentration:
      Invalid Input
    6. Chemical 5 and Concentration:
      Invalid Input
    7. Operating temperature:
      Invalid Input
    8. Operating pressure:
      Invalid Input
    9. Max temperature:
      Invalid Input
    10. Max pressure:
      Invalid Input
    11. UV exposure?
      Invalid Input
    12. Pressure of solids?
      Invalid Input

    13. For proprietary chemicals (or "trade-name" chemicals) a SDS form should be attached as well.
      Invalid Input
    14.  
    1. 4. Installation Options
    2. Please indicate any additional service which might be required.
      Invalid Input

    3. Notes:
      1. Take-offs cannot be done from process and instrumentation drawings (P&ID's). Site plans will be needed for accurate assessment for leak detection components and routing.
      2. It is the responsibility of the installing contractor to supply their sales contact with a proper material takeoff, as different methods of system layout are used.
      3. Asahi/America cannot and will not be held accountable for incorrect takeoffs and improperly ordered materials. we are here to assist the customer in choosing the correct product for the application.

    Request for Quote - Industrial Piping Systems

    Industrial RFQ
    1. Project name:*
      Invalid Input
    2. Contact name:*
      Invalid Input
    3. Contact email:*
      Invalid Input
    4. Contact phone:*
      Invalid Input
    5.  
    1. 1. Basic System Information
    2. Media and known chemicals:
      Invalid Input
    3. System process:
      Invalid Input
    4. Media temperature:
      Invalid Input
    5. Ambient temperature range:
      Invalid Input
    6. Install temperature:
      Invalid Input
    7. Operating pressure:
      Invalid Input
    8. Max system pressure:
      Invalid Input
    9. Flowrate(s):
      Invalid Input
    10. Size(s) required:
      Invalid Input
    11. SDR requested (leave blank if unknown):
      Invalid Input
    12. Presence of solids?
      Invalid Input
    13. UV exposure?
      Invalid Input
    14. Buried?
      Invalid Input
    15.  
    1. 2. Double Containment System Options.
      Please provide information below if system is to be double contained. If single wall, leave blank.
    2. Leak detection options - pressure (check if needed):
      Invalid Input

    3. Leak detection options - drainage (check if needed):
      Invalid Input

    4. Leak detection options - manual/probe (check if needed):
      Invalid Input

    5. Additional components (check if needed):
      Invalid Input
    6.  
    1. 3. Piping Material Selection.
      If you know what piping material you would like to use, please select it below. If you would like a recommendation from the Asahi/America Engineering Department, please fill out the chemical resistance information.

    2. Single wall pipe (leave blank if unknown):
      Invalid Input
    3. Other:
      Invalid Input

    4. Double wall pipe (leave blank if unknown):
      Invalid Input
    5. Other:
      Invalid Input

    6. For proprietary chemicals (or "trade-name" chemicals) a SDS form should be attached as well.
      Invalid Input
    7.  
    1. 4. Chemical Resistance Information.
      Please fill out if a material recommendation is required from the Asahi/America Engineering Department. For proprietary chemicals (or "trade-name" chemicals) a SDS form should be attached as well.
    2. Chemical 1 and Concentration:
      Invalid Input
    3. Chemical 2 and Concentration:
      Invalid Input
    4. Chemical 3 and Concentration:
      Invalid Input
    5. Chemical 4 and Concentration:
      Invalid Input
    6. Chemical 5 and Concentration:
      Invalid Input
    7. Operating temperature:
      Invalid Input
    8. Operating pressure:
      Invalid Input
    9. Max temperature:
      Invalid Input
    10. Max pressure:
      Invalid Input
    11. UV Exposure?
      Invalid Input
    12. Presence of solids?
      Invalid Input
    13.  
    1. 5. Installation Options
    2. Please indicate any additional service which might be required.
      Invalid Input

    3. Notes:
      1. Takeoffs cannot be done from process and instrumentation drawings (P&ID's). Site plans will be needed for accurate assessment for leak detection components and routing.
      2. It is the responsibility of the installing contractor to supply their sales contact with a proper material takeoff, as different methods of system layout are used.
      3. Asahi/America cannot and will not be held accountable for incorrect takeoffs and improperly ordered materials. We are here to assist the customer in choosing the correct product for the application.

    Request for Quote - Asahitec PP-RCT Piping Systems

    Asahitec RFQ
    1. Project name:*
      Invalid Input
    2. Contact name:*
      Invalid Input
    3. Contact email:*
      Invalid Input
    4. Contact phone:*
      Invalid Input
    5.  
    1. 1. Basic System Information
    2. Media and known chemicals:
      Invalid Input
    3. System process:
      Invalid Input
    4. Media temperature:
      Invalid Input
    5. Ambient temperature range:
      Invalid Input
    6. Install temperature:
      Invalid Input
    7. Operating pressure:
      Invalid Input
    8. Max system pressure:
      Invalid Input
    9. Flowrate(s):
      Invalid Input
    10. Size(s) required:
      Invalid Input
    11. SDR requested:
      Invalid Input
    12. UV exposure?
      Invalid Input
    13. Buried?
      Invalid Input
    14. Copper components?
      Invalid Input
    15.  
    1. 2. Installation Options
    2. Please indicate any additional services which might be required:
      Invalid Input

    3. Notes:
      1. Take-offs cannot be done from process and instrumentation drawings (P&ID's).
      2. It is the responsibility of the installation contractor to supply their sales contact with a proper material takeoff, as different methods of system layout are used.
      3. Asahi/America cannot and will not be held accountable for incorrect takeoffs and improperly ordered materials. We are here to assist the customer in choosing the correct product for the application.

    Request for Quote - High Purity Piping Systems

    High Purity RFQ
    1. Project name:*
      Invalid Input
    2. Contact name:*
      Invalid Input
    3. Contact email:*
      Invalid Input
    4. Contact phone:*
      Invalid Input
    5.  
    1. Which of the following best describes the application?
    2. Microelectronics:
      Invalid Input

    3. Pharmaceutical/ Life Sciences:
      Invalid Input

    4. Will the system be exposed to UV?
      Invalid Input
    5. Chemical media:
      Invalid Input
    6. Media temperature:
      Invalid Input
    7. Maximum pressure:
      Invalid Input
    8. Maximum Pipe Size (or specify a flowrate):
      Invalid Input
    9.  
    1. 2. Water Quality Standards
    2. Which of the following standards does the system need to meet? For information on different water quality standards, please see below.
      Invalid Input
    3. Other:
      Invalid Input

    Request for Quote - Actuation

     

    Actuation RFQ
    1. Project name:*
      Invalid Input
    2. Contact name:*
      Invalid Input
    3. Contact email:*
      Invalid Input
    4. Contact phone number:*
      Invalid Input
    5.  
    1. 1. Electric Actuators
    2. Required output torque:
      Invalid Input
    3. Supply voltage:
      Invalid Input
    4. Control voltage:
      Invalid Input
    5. Area classification:
      Invalid Input
    6. Operation:
      Invalid Input
    7. Rotation:
      Invalid Input
    8. Intended use:
      Invalid Input
    9. Manual override:
      Invalid Input
    10. Options required:
      Invalid Input
    11.  
    1. 2. Pneumatic Actuators
    2. Required output torque:
      Invalid Input
    3. Air supply (80psi STD):
      Invalid Input
    4. Operation:
      Invalid Input
    5. Intended use:
      Invalid Input
    6. Area classification:
      Invalid Input
    7. Options required:
      Invalid Input
    8. 3. Additional Information
    9. Quantity required:
      Invalid Input
    10. If mounting kit is required for Asahi valve, please indicate valve size and type. If mounting kit is required for a non-Asahi valve, please provide valve torque and mounting dimensions.
      Invalid Input
    11. Special notes:
      Invalid Input
    12.  
    1. 3. Valve Operations
    2. Please select either manual or actuated, as well as any additional requirements:
      Invalid Input

    3. For manual butterfly valves, please select:
      Invalid Input

    4. If electrically actuated, please select voltage:
      Invalid Input

    5. If electrically actuated, please select code requirements (any which apply):
      Invalid Input

    6. Please list other code requirements not listed:
      Invalid Input

    7. If pneumatically actuated, please select operation type:
      Invalid Input
    8.  
    1. 4. Chemical Resistance Information. Please fill out if a material recommendation is required from the Asahi/America Engineering Department. For proprietary chemicals (or "trade-name" chemicals) a SDS form should be attached as well.
    2. Chemical 1 and Concentration:
      Invalid Input
    3. Chemical 2 and Concentration:
      Invalid Input
    4. Chemical 3 and Concentration:
      Invalid Input
    5. Chemical 4 and Concentration:
      Invalid Input
    6. Chemical 5 and Concentration:
      Invalid Input
    7. Operating Temperature:
      Invalid Input
    8. Operating Pressure:
      Invalid Input
    9. Max Temperature:
      Invalid Input
    10. Max Pressure:
      Invalid Input
    11. For proprietary chemicals (or "trade-name" chemicals), a SDS form should be attached as well.
      Invalid Input

    Proweld Equipment Questionnaire

    Click here to get a pdf copy of this form and our rental agreement.  Please complete and email to asahi@asahi-america.com

    Asahi/America requires all welders to be trained on our equipment and material. This ensures proper installation and tool use. Welders familiar with thermoplastic welding can be trained more quickly on our equipment since they already have thermoplastic welding experience.

    Note: Welding tool size does not indicate full capability of all piping materials in that size range. Some material may have weld pressure requirements above the tools output.

    Please complete this form and send to Asahi/America for review of the project's tool needs.

    Proweld Questionnaire
    Distributor Name and Location

    Invalid Input
    Project Name

    Invalid Input
    Sales Quote or Order Number

    Invalid Input
    Piping Material Being Welded

    Invalid Input
    Welding Method

    Invalid Input
    Size of Pipe to be Welded

    Invalid Input
    Requested Welding Machines

    Invalid Input
    Contact Name

    Invalid Input
    Contact Email

    Invalid Input

    Will Tool Training be Required

    Yes or No

    Invalid Input
    If NO who was Trained

    Invalid Input
    Date of Training


    Invalid Input
    Equipment and Material Trained on

    Invalid Input
    Expected Date for Training


    Invalid Input



    2019 Semicon Video

    Introducing- The Next Generation of IR Welding Technology

    V3 Landing Page

    Available for Purchase or Rental

    Asahi/America, Inc., your experts in plastics introduces the latest innovation in automated infrared welding: the SP 110-S V3. The V3 combines proven repeatable and reliable IR welding technology with a more efficient design, numerous enhancements, and new features.

    The SP 110-S V3 has been redesigned for increased automation, improved electronics and versatility in mind. The V3’s planer and heating element retract to provide a clear view of the weld and 360-degree access to the weld area. The overall weld process has improved automation providing greater weld efficiency.

    The transport box is now more compact and functions as an integrated work bench with storage for all accessories. The machine is easily accessible and has been optimized for safe set-up in clean rooms.

    The SP 110-S V3 now features a larger touchscreen and the latest electronic hardware. A higher memory and data capacity allows for storage of 20,000 welds and 42 custom weld parameters. Asahi/America’s Poly-Flo® co-extruded double wall pipe parameters come embedded in the standard parameters.

    Additional data fields have been added to the weld labels, and weld data can now be managed via a smartphone app by scanning the QR code on the weld label.

    The V3 also includes all the core features of our SP Series IR welding equipment including automated force control welding for the most reliable welds, magnetic clamp inserts for fast change-out, and adjustable planing and alignment controls for perfect fabrications.

    Ideal for shop or clean room operation, the SP 110-S V3 welds 1/2” through 4” (20 mm – 110 mmm) single and double wall pipe including PP, PPn, PVDF, PE 100-RC, ECTFE and PFA.

    SP 110S V3 Resource Center

    Video

    Data Sheet
    SP Landing Video Sport data sheet 

    Watch SP 110-S V3 Video

    Run time: 3:43

    		 Download Data Sheet

     

     

     

    Go Green Quote Submission Form

     Please remember to attach your quote before hitting submit

    Please contact your Asahi/America District Sales Manager with any questions regarding this promotion.

    Please contact Jeff Baker at jbaker@asahi-america.com with any problems submitting this form.

    Promotion ends on Sunday, June 30th.

    Go Green Submission Form
    1. Name(*)
      Invalid Input
    2. Inside Sales Person(*)
      Invalid Input
    3. Outside Sales Person(*)
      Invalid Input
    4. Branch(*)
      Invalid Input
    5. Project Name(*)
      Invalid Input
    6. Contact Name
      Invalid Input
    7. Contact Phone or Email
      Invalid Input
    8. Application(*)
      Invalid Input
    9. Media (Fluid)
      Invalid Input
    10. Temperature
      Invalid Input
    11. Pressure
      Invalid Input
    12. Copy of Quote
      Invalid Input

    Please complete the form below and we will follow up with you shortly.

    Asahi/America 2018 Photo Contest Submissions

    2018 Photo Contest Entries

    Contest runs from Dec 1st-31st 2018.
     2018 Contest Entry CA Aquarium Type 21  2018 Contest Entry POOLPRO CA 3

    Type-21 Ball Valve 

    Aquarium - California

    Pool-Pro® Butterfly Valve 

    California

     2018 Contest Entry Type 57 Butterfly Valve NO CA Aquarium  Contest Entry Frank Series Regulator and Purad PVDF pipe Semiconductor Manufacturing UT

    Type-57 Butterfly Valve 

    Aquarium - Northern California

    Frank V82 Regulator and Purad PVDF Pipe 

    Semiconductor Manufacturing - Utah 

     2018 Contest Entry Mexico Type 21 Ball Valves  2018 Contest Pharmaceutical PolyPure in PA

    Type-21 Ball Valves

    Industrial Water Treatment - Monterrey Mexico -

     PolyPure® Pipe Waiting to be Installed

    Biopharmaceutical Facility - Pennsylvania

    2018 Contest Enrty NJ Water Poly Flo and Type 21 Valves
     2018 Photo Contest Chem Proline and Halar T342 diaphragm valve at CPI in Food

    Poly-Flo® Double Wall Piping and Type-21 Ball Valves

    Water Treatment - New Jersey

     Chem Proline® Pipe and Halar T-342 Diaphragm Valve

    CPI in Food Plant - Midwest USA
    2018 Contest Entry Water Skid Mexico 2018 Contest Entry Pool Pro Houston 

    Type-21 Ball Balves and Chem Proline® Pipe

    Water Skin - Mexico

    Pool-Pro® Butterfly Valve w/Plasgear

    Houston, TX
    Contest Entry Gate and Swing Check Valve Landfill GA Contest Entry Type 14 and Type 21 at Water Treatment Facility CA 

    Gate and Swing Check Valves

    Landfill - Georgia

    Type-14 Diaphragm and Type-21 Ball Valve

    Watertreatment Facility - California
    2018 Contest Entry AZ Semiconductor Manufacturing Duo Pro PP150 x PP150 2018 Contest Entry Asahi Pool Pro in Indianapolis IN 2

    Duo-Pro® Double Containment Piping

    Semiconductor Manufacturing Facility - Arizona

    Pool-Pro® Butterfly Valves

    Indianapolis, Indiana
    2018 Contest entry High Purity Purad PVDF pipe and T 343 Diaphragm Valve in Lab in IL 2018 Contest Entry Pool Pro and Type 21 Recreation Center Equipment Room
     

    Purad® PVDF Pipe and T-343 ZDL Diaphragm Valve

    Labratory - Illinois

    Pool-Pro® Butterfly and Type-21 Ball Valves

    Recreation Cener Pool Equipment Room - Utah
    2018 Contest Entry SF Shipyard Chem Pro and Type 57 2018 Contest Asahi Series 79 Actuaotr 

    Chem Proline® Pipe and Type-57 Butterfly Valve

    Ship Yard - California

    Series 79 Pneumatic Actuator

    Manufacturing Plant - New Jersey
    2018 Contest Asahi tees made into vacuum breakers 2 Martin Ruiz Ryan Herco

    Proline® Vacuum Breakers

    Fracking - Texas

    Duo-Pro® Double Wall Piping

    Florida
    Nucor PPR 2  

    Proline® Piping

    Steel Plant - Arkansas

    		  

    Please complete the form below (don't forget to attach your photo)

    Application Submittal form - FOR INTERNAL USE ONLY
    Title
    Invalid Input
    Please note application and industry
    Invalid Input
    Problem Solved and Solution
    Invalid Input
    Distributor
    Invalid Input
    Contractor, Engineering Firm, Etc.
    Invalid Input
    Media
    Invalid Input
    Pressure
    Invalid Input
    Temperature
    Invalid Input
    Asahi America Products Used
    Invalid Input
    Your name
    Invalid Input
    Attach any images you may have

    Expansion Calculator








    Disclaimer: Please note the communication and information provided herein is intended to give a basic knowledge of the specifications and performance of the related product. This information is general, and may not suit all applications. In every and all applications for the quoted products, please consult the professional responsible for the design, engineering, architectural and/or project application for the installation, incorporation and/or maintenance of the above products.

    Have Questions?

    Thank you for visiting!

    Enter to Win a Free Asahi/America t-shirt

    We are giving two t-shirts away each week.

    • No purchase necessary.
    • One entry per email address please. (Multiple entries will not be considered) You only need to enter once. Once you have entered you are entered for the entire length of the promotion.
    • Offer valid for US mailing addresses only

    Registration Form
    Your Name (*)
    Please let us know your name.
    Your Email (*)
    Please let us know your email address.
    Company (*)
    Please write a subject for your message.
    St Address (*)
    Invalid Input
    City (*)
    Invalid Input
    State (*)
    Invalid Input
    Zip Code (*)
    Invalid Input
    PO Number (*)
    Invalid Input
    T-shirt size (*)
    Invalid Input

    test

    Poly-Flo Double Containment Piping System

     

    Page Not Found

    We're sorry, the page you were looking for can not be found. Please check the URL.

    Click here if you would like to visit our homepage or use the above navigation to find the page that you were looking for.

    The Title of The Page

    External Link. Send me an email. Where does this link go? Sit amet elit. Nullam eu nulla quis enim rutrum scelerisque. Suspendisse in tellus. Donec ut mi sit amet est iaculis sodales. Vivamus iaculis sagittis risus. Phasellus leo. Phasellus turpis metus, porttitor sollicitudin, auctor eget, blandit ut, dolor. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos hymenaeos. Nulla facilisi. Maecenas nonummy tellus porttitor sapien.

    The Subtitle

    Internal Link praesent scelerisque mi imperdiet ligula. Felis vitae tellus varius viverra. Curabitur pulvinar tempus sapien. Vivamus leo nibh, elementum non, suscipit id, viverra et, erat. Sed elementum luctus elit. Proin fringilla ipsum sed nibh. Praesent convallis, arcu vitae malesuada varius, nibh pede pharetra massa, quis dignissim justo augue id magna. Proin a libero. Aliquam nec lorem.

    Table Header

    Aenean leo velit, molestie sed, commodo ac, tristique sed, libero. Nam ultricies.

    Nullam sodales libero et massa. Suspendisse augue.

    Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas.

    Donec eu odio posuere urna tincidunt suscipit. Donec dignissim molestie libero.

    Donec eu odio posuere urna tincidunt suscipit. Donec dignissim molestie libero.

    Donec eu odio posuere urna tincidunt suscipit. Donec dignissim molestie libero.

    Here's a list

    • list item 1
    • list item 2
      • sub list item 1
      • sub list item 2
    • list item 3
    • list item 4

    "Lorem ipsum dolor sit amet, consectetur adipiscing elit. Fusce urna nisi, laoreet vel rutrum non, venenatis sed odio. vel rutrum non, venenatis sed odio."

    John Doe, CEO
    Company ABC

    Technical Paper ipsum dolor sit amet, adipiscing elit. Nulla et nulla. Sed elementum aliquam neque. Praesent rhoncus massa a felis. Mauris vestibulum elit eget diam. Pellentesque egestas condimentum nulla. Phasellus dapibus, lacus in placerat feugiat, tortor sem ornare dolor, ac suscipit massa magna ornare quam. Sed quis

    Technical Paper ipsum dolor sit amet, adipiscing elit. Nulla et nulla. Sed elementum aliquam neque. Praesent rhoncus massa a felis. Mauris vestibulum elit eget diam. Pellentesque egestas condimentum nulla. Phasellus dapibus, lacus in placerat feugiat, tortor sem ornare dolor, ac suscipit massa magna ornare quam. Sed quis

    Right here

    dolor non arcu lacinia porta. In in lacus. Quisque sollicitudin, est id ultricies aliquam, enim tortor auctor lacus, vel tempus nunc est eu odio. Quisque feugiat euismod sapien. Fusce vitae ligula. Nullam pulvinar. Donec velit mi, aliquet non, porttitor elementum, congue egestas, nisi. Cras nisi nisi, semper ac, faucibus ut, faucibus porta, erat. Vestibulum vitae ante. Donec laoreet.
    Request a Quote
    live chat software
    My Asahi Customer Portal
    Welding Parameter Web App