header valves
Valves & Actuation
series-17-with-type-21

Actuated Plastic Ball Valves

Fast Pack

Series 17 Electric Actuator on Type-21 Ball Valve

The Series 17 electric actuator features a reversing motor with multi-voltage capabilities; 85 VAC - 265 VAC (50/60Hz), 24 VDC. An internal heater, auxiliary switches, and two position indicating LEDs, are the standard equipment. Additional features include a permanently lubricated steel gear train, NEMA Type 4 & 6 enclosure with a thermally-bonded powder coat finish, declutchable manual override, visual mechanical position indication, ISO bolt circle, and flying leads.

Resources

Video

Data Sheet

Ideal Applications Include:

water and wastewater treatment, landfills, aquariums, chemical processing, swimming pools and water features, power plants, and mining applications.

Actuator:

Series 17

Torque:

350 in./lbs.

Voltage:

85-265 VAC single phase, 24 VDC

AMP Draw:

Wiring:

Max Ambient Temperature:

0.45

1.2M flying leads

150°F

Limit Switches:

Heater:

Cycle Time per 90 degree:

2- SPDT end of travel switches

2-SPDT dry contact switches

.5W

12 seconds

Features/Benefits

  • Size: Compact, lightweight
  • Motor: Low current, reversing DC motor
  • Multi-voltage: 85-265VAC single-phase, 24VDC
  • Overload Protection: Electric motor cuts out at 2 Amps
  • Gear Train: Permanently lubricated solid gearing
  • Corrosion Resistant Enclosure: Thermally bonded powder coat finish
  • Position Indication: Mechanical dial indication
  • LEDs: Open and close LED position indication (red/closed, blue/open)
  • Declutchable Manual Override:Push down override button and use provided lever to manually position in the event of no power
  • Auxiliary Limit Switches: Dry contact switches for open and close positions
  • Enclosure: Combination NEMA Type 4X and 6 enclosure with captive cover screws
  • Electrical Connections: Sealed cable gland with 1.2M flying leads
  • Space Heater: Standard equipment
  • ISO Mounting: F03, F04, F05 X 14mm star