header valves
Valves & Actuation

Series 19 SAV Failsafe

series-19-sav-actuator

Series 19 Smart SAV Failsafe Electric Actuators

A failsafe actuator cycles as on/off while charging internal capacitors. When power is lost, the capacitors discharge and power the unit to a predetermined fail position. When power is restored, the capacitors charge up again.

Button CAV On Off Button CAV Fail Safe Button Smart On Off Button Failsafe Button Modulating Button Mod Failsafe
Sav Final Logo Smart Compact Powerful

new failsafe

Series 19 SAV Failsafe Valve/Actuator Packages

Ball Valves

Butterfly Valves

Series 19 on Type 21 Series 19 on Type 23 Series 19 on Type 57P
Button Type 21 Button Type 23 Button Type 57
Ideal Applications Include:

Remote locations, locations with no air supply, colder temperatures, smaller valves, low cost applications

Sizes:

S20FS, S50FS, S110FS

Amp Draw:

0.18 Amp for S20, 0.24 Amp for S50, 0.84 for S110                

Cycle Time:

Per 90 degrees: 10 seconds

Torque:

177 in-lbs to 973 in-lbs

Electrical Connection:

NEMA 4X cable gland with two-meter color-coded cable

Enclosure:

NEMA 4X

Voltage:

95 VAC to 265 VAC 1Ph 50/60 Hz

24 AC/DC

Max Temp:

150° F

Features/Benefits

  • Compact: Perfect for OEM and skid manufacturers
  • OLED Screen: Displays valve position and alarms
  • Push Buttons: Used to calibrate/adjust end positions and operate local controls
  • Multi-voltage: 95 VAC to 265 VAC or 24 VAC/VDC
  • Motor: Reversing, brushless DC motor
  • Capacitor Discharge System: A capacitor is used in place of batteries for failsafe mode
  • Selectable Fail Position: Fail close is standard; fail as is, or fail open are options
  • Corrosion Resistant Enclosure: NEMA 4X ABS enclosure with stainless steel trim
  • Electrical Connection: NEMA 4X cable gland with two-meter cable length
  • LED Position Indication: RED closed, GREEN open, BLUE fault
  • Manual Override: Manually cycle valve via electroless nickel-plated hex key
  • Auxiliary Contacts: Open and close dry contacts rated 0.1 Amp @ 250 VAC, 0.5 Amp @ 30 VDC
  • Alarm Contacts: Dry contacts rated 0.1 Amp @ 250 VAC, 0.5 Amp @ 30 VDC for alarm status (over torque, as an example)
  • Space Heater: Internally wired to limit condensation
  • CE Compliant: All actuators are CE labeled and compliant
  • 75% Duty Cycle: Ideal for high cycling applications
  • Output Torque: Series 19 electric actuators have an output torque range from 177 in-lbs to 442 in-lbs
  • Simple Wiring: Wiring technique is the same for all voltage units
  • Local Controls: Used with OLED and push buttons, a user can locally open or close units via password
  • QR Code: Links to user manual; includes wiring schematic

Actuation

Can be mounted on:

  • Type-21 and Type-23 ball valves
  • Type-57P butterfly valves
  • Pool-Pro® butterfly valves
  • Type-55/55 IS butterfly valves

Resources

Data Sheets and Catalogs
Technical Resources
Training & Videos