header valves
Valves & Actuation

Plastic Electric Actuators

Series 83 - Electromni®

The Series 83 - Electromni® is our smallest electric actuator, suitable only for ball valves up to 2", which offers a low-cost alternative to our larger actuators.


Data Sheet


Ideal Applications Include:

Locations with no air supply, smaller valves, OEM applications, low cost applications





120 VAC 1 Ph 50/60Hz (others available)

Conduit Entry:

1/2" NPT


1-SPDT rated 15 Amp


120 in/lbs

Amp Draw:


Max Ambient Temperature:


Cycle Time

1/4 turn per 5 seconds


  • PVC or CPVC Omni valve (All materials Type-21 or Type-23 ball valves up to 2”)
  • Standard models are 115 vac thermally protected with single limit switch cam/coupling activated
  • Redesigned sealed weatherproof enclosure includes:
    • Flanged cover and base Type 4X rated enclosure with Nitrile flat gasket seal
    • Nitrile O-ring or gasket valve to actuator base seal
    • Nitrile motor mounting bolt seals
    • Redesigned NPT threaded to base 90º elbow provides 1/2" NPT conduit entry w/ 6" color coded wire leads
  • Interated ISO mounting pattern baseplates [T-21 & T-23 models
  • Direct mounted valves no mounting bracket required
  • Sealed 90º cable entry elbow
  • Captivated stainless steel hex head slotted cover screws
  • 1/4 turn 5 seconds cycle time uni-directional
  • (120 & 220 vac) motors
  • Compact and low profile, ideal for OEM type installations


  • Voltages: 220 VAC, 12/24 VAC, 12/24 VDC
  • 2-wire control relay for retrofitting solenoid
  • (Requires constant power and SPST dry contact switching
  • 1-additional limit switch for open/close position indication
  • Amber/Green position indicating lights