header valves
Valves & Actuation
Series 92 on Type 21 Fast Pack

Actuated Plastic Ball Valves

Type-21 with Series 92 Electric Actuator

The Type-21 ball valve can be actuated by the Series 92 electric actuator in all sizes.

Resources

Data Sheet

Ideal Applications Include:

Locations with no air supply or colder temperatures

Specifications

Sizes

S92, A92

Torque:

400-700 in/lbs

Voltage:

120 VAC standard, 220 VAC, 12/24 VAC or 12/24 VDC optional

Amp Draw:

A94: 0.5A
B94: 0.8A

Conduit Entry:

Two 1/2" NPT

Max Ambient Temperature:

150°F

Switches:

Two single pole, double throw (SPDT), 15 Amp rated

Cycle Time per 90 degrees:

5 seconds

Features/Benefits

  • Motor – Reversing, brushless, capacitor run 115 VAC 50/60 Hz single phase
  • Overload Protection – Integral thermal overload protection for motor windings with automatic reset
  • Gear Train – Permanently lubricated
  • Corrosion Resistant Housing – Zytel FR50 engineered resin with stainless steel trim
  • ISO -Mounting Configuration
  • Conduit – Two ½" NPT conduit entries to eliminate cross feed between control, feedback, and power signals
  • Position Indication – Highly visible position indicator for positive position of the valve, even at a distance
  • Declutchable Manual Override – Push down on handle and rotate in appropriate direction (CCW for open, CW for close)
  • Limit Switches – Standard end of travel limit switches can be used for light indication (NOT to be used with PLC for position indication)
  • Corrosion resistant mounting – Mounting is with PPG or stainless steel bracket, stainless steel coupling, and stainless steel hardware
  • CE Compliant Motor – All 115 VAC and 230 VAC motors are CE compliant and stamped as such
  • Extended Duty Cycles – Our extended duty cycles are ideal for modulating and high cycling applications
  • Output Torque – Series 94 electric actuators have an output torque range from 150 in/lbs to 300 in/lbs
  • Enclosure – Type 4X
  • RoHS Compliant

Options

  • Auxiliary (additional) limit switches
  • Feedback potentiometer
  • Heater and thermostat
  • Positioner (modulating PCB)
  • Mechanical brake
  • Transmitter
  • Cycle length control module
  • Two-wire control
  • Failsafe battery backup (Protek)
  • Additional voltages
  • Local Remote Station