Product Catalog Where to Buy Resource Center Service Center For the Distributor For the Engineer For the Contractor
Valves
Actuation
Electric
Series 92 - Quarter Master
Series 94 - Quarter Master
Series 87
Series 83 - Electromni
Pneumatic
High Temp/180 Degree
AS-i Bus
Westlock Limit Switch
Safety Springs & Travel Stop
Positioners
Local Remote Station
Fast Packs
Industrial Piping
High Purity
Environmental Piping
Dymatrix
EM Technik Tube Systems
Welding Equipment
New Product Showcase
Product Certifications
Series 87 Electric Actuators

Resources

Features and Benefits

  • Motor: Reversing, brushless, capacitor run 115 VAC 50/60 Hz, single phase
  • Overload protection: Integral thermal overload protection for motor windings with automatic reset
  • Gear train: Permanently lubricated
  • Conduit: Two 3/4" NPTF conduit entries to eliminate cross feed between control, feedback and power signals
  • Declutchable manual override: Push down on handwheel until engaged with cam and rotate
  • Limit switches: Standard end of travel limit switches can be used for light indication (not to be used with PLC for position confirmation) Two (2) auxiliary (additional) limit switches
  • Enclosure: NEMA 4X
  • Corrosion resistant mounting: Mounting is with stainless steel bracket, stainless steel coupling and stainless steel hardware
  • Output torque: Series 87 Electric Actuators have an output torque range from 5000 in/lbs to 10,000 in/lbs
  • Mechanical Brake

Engineering Specifications

  • Size: E87, F87
  • Torque: 5,000-10,000 in/lbs
  • Voltage: 120 VAC 1Ph 50/60 Hz
  • Amp Draw: E87 1.7, F87 2.2
  • Conduit Entry: Two (2) 3/4" FNPT
  • Max Ambient Temperature: 150ºF
  • Cycle Time per 90º : E87, F87: 30 seconds

Options - Series 87 Options - 72 kb

  • Feedback potentiometer
  • Heater and thermostat
  • 4-20 mA Positioner (Modulating PCB)
  • Mechanical brake
  • 4-20 output source (transmitter)
  • Cycle length control module (CLC)
  • Two-wire control
  • Center-off
  • Voltages
  • Local Remote Station