header valves
Valves & Actuation
HMI LRS

HMI/LRS Control System

Control Four Valves with One Unit

Introducing the completely redesigned Local Remote Station; the HMI/LRS. The HMI/LRS is a mini PLC that will communicate with the main PLC at the plant via relay inputs, and cycle up to four automated valves via 10A DPDT relays. An additional relay is installed to report local/remote status back to the main PLC for each actuator, and a terminal strip is included for applications where the main PLC requires valve position confirmation. All HMI/LRS components (power supply, PLC,terminal blocks, relays, etc.) are located inside a fiberglass/ polyester NEMA Type 4X latched and lockable enclosure, with open/close indicating LEDs, and STOP buttons for each valve.

Installation is easy; simply provide 120-240 VAC as the supply voltage, and specific voltage through the relay contacts to cycle the automated valves.

Ideal Applications Include:

Features/Benefits

  • Controls up to four actuators
  • Simple pushbutton operation
  • 2-Lines X 16-character LCD display
  • NEMA Type 4X enclosure constructed of fiberglass polyester
  • Stainless steel trim
  • Captive cover gasket
  • Lockable latched cover
  • Terminal blocks for inputs
  • DPDT relays and sockets for outputs
  • Local/Remote status contacts
  • Indicating LEDs for each actuator (green open/red close)
  • Four individual STOP buttons
  • 32°F – 122°F temperature range
  • Four provisions for ½" conduit
  • 120 - 240 VAC power supply required

Options

  • Stainless steel enclosure
  • Contact factory for specific applications